flash tape composites, flash tape vacuum bagging, flash tape resin infusion, flash tape for moulding, flash tape for prepreg
High temperature, pressure sensitive PET (polyester) tape with a silicone adhesive. It can be used to provide an instant, temporary release surface on any material, to hold down vacuum bagging consumables in position, join temporary barriers and also tape flash lines on moulds. It is versatile, easy to remove, tear resistant, has a flat, shiny surface and does not deform in high heat (zero curling and shrinkage). Easily separable from the epoxy, it leaves a clean finish with no residue or damage to the applied surface when removing it.
Technical characteristics:
Material type: PET (polyester)
Roll length: 66 meters
Width: 25 mm
Thickness: 61 μm
Long term working temperature: 120°C (248°F)
Maximum short term working temperature: 228°C (442°F)
Suitable for multiple applications:
Vacuum bagging
Resin infusion
Pre-preg processes
Oven/autoclave curing
Epoxy and polyester surface
Woodworking and resin casting
Various art applications
