Roll Wrapped Carbon Fiber Tube Twill Weave Gloss Finish 48″ long – Measurements come in at x 1220mm/48″ in length. This carbon fiber tube uses high strength unidirectional T-700 equivalent carbon fiber core with an epoxy resin system to ensure a strong rigid tube that will meet your needs. In addition to this high strength uni core this tube is finished with a beautiful 2×2 twill weave carbon fiber and then given a gloss finish. Due to raw material constraints it is hard to create pipes exactly at a specific measurement unless they are built over-sized and machined down so that is why our pipes may be a few thousandths off from our ideal measurement we are trying to match.
This tube is available in 1/2″, 3/4″, 1″, 1.25″, 1.5″, & 2″ OD diameters.
| Outside Diameter | Inside Diameter |
| 13mm/.512″ | 11mm/.434″ |
| 19mm/.748″ | 17mm/.670″ |
| 25mm/.984″ | 23mm/.906″ |
| 32mm/1.260″ | 29mm/1.142″ |
| 38mm/1.496″ | 35mm/1.378″ |
| 51mm/2.008″ | 48mm/1.890″ |
| Tube Specs: | |
| Length | 1220mm/48″ |
| Tolerances OD | +/- 0.1mm/.004″ |
| Tolerances ID | +/- 0.05mm/.002″ |
| Tolerances Length | +/- 1mm/.04″ |
| Weight | 2.24oz/63.5g |
We offer many composite tubing varieties if this tube does not meet your needs. We offer pultruded materials in round solid bar, pipe, and square bar/tubing. Upon special order all of our unique fabrics can be converted into piping.
Reviews
There are no reviews yet.